Lenze EVS 9300 series - Phase Conversion (CONVPHA); Phase Conversion (CONVPHPH)

Function library
Function blocks
9.2.19 Phase conversion (CONVPHA)
9-85
L
EDSVS9332S-D11 EN 3.0
9.2.19 Phase conversion (CONVPHA)
Purpose
z Converts a phase signal into an analog signal
or
z converts a phase difference signal into a speed signal.
C 1 0 0 2
C O N V P H A 1
C O N V P H A 1 - I N
C 1 0 0 1
C 1 0 0 0
1
2
± 1 9 9 , 9 9 %
- O U T 2
- O U T
Fig. 9-48 Phase conversion (CONVPHA1)
Signal
Source Note
Name Type DIS DIS format CFG List
CONVPHA1-IN ph C1002 dec [inc] C1001 3 -
CONVPHA1-OUT O - - - - Limited to ±199,99 %, remainder considered
CONVPHA1-OUT2 phd - - - - Limited to ±32767 rpm, remainder considered
Function
z Conversion with adaptation using a divisor.
z The conversion is performed according to the formula:
CONVPHA1-OUT [% ] = CONVPHA1-IN [inc] ⋅
100
2
14
⋅ 2
C1000
CONVPHA1-OUT2 [rpm] = CONVPHA1-IN [inc] ⋅
15000
2
14
⋅ 2
C1000
CONVPHA1-OUT2 [inc] = CONVPHA1-IN [inc] ⋅
1
2
C1000