Contents
i
L
EDSVS9332S-C EN 3.0
5 Commissioning 5-1.......................................................
5.1 Initial switch-on 5-1...............................................................
5.1.1 Switch-on sequence 5-2...................................................
5.2 Input of the motor data 5-4..........................................................
5.2.1 Operation with synchronous motors made by other manufacturers 5-5..................
5.3 Controller enable 5-8..............................................................
5.4 Input of the direction of rotation 5-8...................................................
5.5 Quick stop 5-9...................................................................
5.6 Change of the internal control structure 5-9..............................................
5.7 Change of the terminal assignment 5-10.................................................
5.7.1 Freely assignable digital inputs 5-10............................................
5.7.2 Freely assignable digital outputs 5-12...........................................
5.7.3 Freely assignable analog inputs 5-12...........................................
5.7.4 Freely assignable monitor outputs 5-12.........................................
6 During operation 6-1......................................................
6.1 Status indications 6-1..............................................................
6.1.1 Display on the controller 6-1................................................
6.1.2 Display on the keypad 6-1..................................................
6.1.3 Display in Global Drive Control 6-2............................................
6.1.4 Actual value display via codes 6-3............................................
6.2 Information on operation 6-4.........................................................
6.2.1 Switching on the motor side 6-4..............................................
6.2.2 Controller protection by current derating 6-5.....................................