Function library
Monitorings
9.3.2 Set reactions
9-220
L
EDSVS9332S-D11 EN 3.0
9.3.2 Set reactions
1. Click on the ” Parameter menu” button in the ” Basic settings” dialog box.
2. Open the ” Dialog diagnosis” menu by a double-click.
Fig. 9-172 Dialog box ”Diagnosis 93xx”
3. Click the button ”Monitorings...”.
Fig. 9-173 ”Monitoring configuration 93xx” dialog box
4. Click on the required monitoring function.
5. Select possible or permitted reaction and confirm with ”OK”.
An overview of the monitoring functions and thesettings can beobtained from the following chapter.
To Next Page
Loading...