Lenze EVS 9300 series - Speed control (C0005 = 1000)

Application examples
12-1
L
EDSVS9332S-K EN 3.0
12 Application examples
Signal processing in the controller is saved in basic configurations for common applications.
z You can select and activate the basic configurations via C0005 and adapt them with only a
few settings to your application (short setup). ( 8-2)
z The setting of the motor data and the adaptation of the motor control is generally independent
of the configuration and is described in chapter ”Commissioning”. ( 5-1)
Configuration Basic function
1xxx Speed control  12-2
4xxx Torque control with speed limitation  12-5
5xxx Master for digital frequency coupling  12-7
6xxx Slave to digital frequency bus  12-10
7xxx Slave to digital frequency cascade  12-12
Tip!
GDC and the operating module include the most important codes for the basic configurations in the
”Short setup” menus.