Lenze EVS 9300 series - Phase Addition Block (PHADD)

Function library
Function blocks
9.2.50 Phase addition block (PHADD)
9-178
L
EDSVS9332S-D11 EN 3.0
9.2.50 Phase addition block (PHADD)
Purpose
Adds or subtracts phase signals depending on the input used.
+
+
+
--
PHADD1
PHADD1--OUT
PHADD1--IN1
C1201/1
PHADD1--IN2
C1201/2
PHADD1--IN3
C1201/3
2 --1
C1200/1
C1200/2
C1200/3
31
PHADD1--OUT2
FB_phadd1
Fig. 9-131 Phase addition block (PHADD1)
Signal
Source Note
Name Type DIS DIS format CFG List Lenze
PHADD1-IN1 ph C1200/1 dec [inc] C1201/1 3 1000 Addition input
PHADD1-IN2 ph C1200/2 dec [inc] C1201/2 3 1000 Addition input
PHADD1-IN3 ph C1200/3 dec [inc] C1201/3 3 1000 Subtraction input
PHADD1-OUT ph - - - - - Limited to ±2147483647
PHADD1-OUT2 ph - - - - - -
Function
z Input PHADD1-IN1 is added to input PHADD1-IN2.
z The input PHADD-IN3 is subtracted from the calculated result.
z Then the result of the subtraction
– is limited to ±2147483647 andoutputatPHADD1-OUT.
– is output at PHADD1-OUT2 without limitations.