Lenze EVS 9300 series - Page 142

Configuration
Basic configurations
8.2.3 Master frequency coupling
8-16
L
EDSVS9332S-D11 EN 3.0
8.2.3.3 Slave for master frequency bus
Purpose
The configuration C0005 = 6XXX for the setpoint bus serves to
z activate the phase control, which is upstream to the speed controller
z change the setpoint signal path to master frequency coupling for phase or speed-synchronous
operation
Resolver
R
Slave 1 Slave2
Factor
Resolver
R
SWI
ö,n--controller
Master drive with
Master integrator and
Slave 0
X8
Encoder
X7
X10
Encoder
output
X6 X9 X10
Encoder
Encoder
output
X7 X8
X9
Resolver
R
Factor
X10
Encoder
Encoder
output
X7 X8
X9
ö,n--controller ö,n--controller
Fig.8-1 Slaveformasterfrequencybus