Function library
Function blocks
9.2.65 Edge evaluation (TRANS)
9-218
L
EDSVS9332S-D11 EN 3.0
9.2.65.3 Evaluate positive or negative edge
t
t
TRANS1--IN
TRANS1--OUT
C0711
C0711
Fig. 9-171 Evaluation of positive and negative edges (TRANS1)
z
The output TRANSx-OUT is set to HIGH as soon as a HIGH-LOW edge or a LOW-HIGH edge
is sent to the input.
z After the time set under C0711 or C0716 has elapsed, the output changes again to LOW
unless there is another HIGH-LOW edge or LOW-HIGH edge at the input.
To Next Page
Loading...