Function library
Monitorings
9.3.3 Monitoring functions
9-247
L
EDSVS9332S-D11 EN 3.0
9.3.3.24 Dig-Set monitoring Sd3
Purpose
Process monitoring
MONIT
MONIT--SD3
4V
X10
Fig. 9-190 Dig-Set monitoring Sd3
Signal
Source Note
Name Type DIS DIS format CFG List Lenze
X10 - - - - - - -
MONIT-SD3 d - - - - - -
Function
The monitoring Sd3 reacts if pin 8 at the digital frequency input X9 is not supplied. Therefore, an
interrupt of the digital frequency coupling can be displayed.
Features:
z LECOM no.: 83, 2083
z Reaction: TRIP, WARNING or OFF
To Next Page
Loading...