LevelOne GEL-1061 - Page 47

Chapter 2 | Using the Web Interface
Navigating the Web Browser Interface
– 47 –
Time 75
Configure General
Manual Manually sets the current time 76
SNTP Configures SNTP polling interval 77
NTP Configures NTP authentication parameters 77
Configure Time Server Configures a list of SNTP servers 78
Configure SNTP Server Sets the IP address for SNTP time servers 78
Add NTP Server Adds NTP time server and index of authentication key 79
Show NTP Server Shows list of configured NTP time servers 79
Add NTP Authentication Key Adds key index and corresponding MD5 key 81
Show NTP Authentication Key Shows list of configured authentication keys 81
Configure Time Zone Sets the local time zone for the system clock 82
Configure Summer Time Configures summer time settings 83
Console Sets console port connection parameters 85
Telnet Sets Telnet connection parameters 87
CPU Utilization Displays information on CPU utilization 88
CPU Guard Sets the CPU utilization watermark and threshold 89
Memory Status Shows memory utilization parameters 90
Reset Restarts the switch immediately, at a specified time, after a specified
delay, or at a periodic interval
91
Interface 95
Port 96
General 96
Configure by Port List Configures connection settings per port 96
Configure by Port Range Configures connection settings for a range of ports 98
Show Information Displays port connection status 99
Statistics Shows Interface, Etherlike, and RMON port statistics 100
Chart Shows Interface, Etherlike, and RMON port statistics 100
History Shows statistical history for specified interfaces 104
Transceiver Shows identifying information and operational parameters for optical
transceivers which support Digital Diagnostic Monitoring (DDM), and
configures thresholds for alarm and warning messages for optical
transceivers which support DDM
108
109
Table 4: Switch Main Menu (Continued)
Menu Description Page