Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 53 –
Configure MAC Filter 248
Add Specifies MAC addresses exempt from authentication 248
Show Shows the list of exempt MAC addresses 248
Show Information Shows the authenticated MAC address list 249
HTTPS Secure HTTP 251
Configure Global Enables HTTPs, and specifies the UDP port to use 251
Copy Certificate Replaces the default secure-site certificate 252
SSH Secure Shell 254
Configure Global Configures SSH server settings 256
Configure Host Key 258
Generate Generates the host key pair (public and private) 258
Show Displays RSA and DSA host keys; deletes host keys 258
Configure User Key 259
Copy Imports user public keys from a TFTP server 259
Show Displays RSA and DSA user keys; deletes user keys 259
ACL Access Control Lists 261
Configure ACL 264
Show TCAM Shows utilization parameters for TCAM 262
Add Adds an ACL based on IP or MAC address filtering 264
Show Shows the name and type of configured ACLs 264
Add Rule Configures packet filtering based on IP or MAC addresses and other
packet attributes
264
Show Rule Shows the rules specified for an ACL 264
Configure Interface Binds a port to the specified ACL and time range
Configure Binds a port to the specified ACL and time range 277
Show Hardware Counters Shows statistics for ACL hardware counters 278
ARP Inspection 279
Configure General Enables inspection globally, configures validation of additional address
components, and sets the log rate for packet inspection
280
Configure VLAN Enables ARP inspection on specified VLANs 282
Configure Interface Sets the trust mode for ports, and sets the rate
limit for packet inspection
284
Show Information 285
Show Statistics Displays statistics on the inspection process 285
Show Log Shows the inspection log list 286
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page