28
Configures global settings, including status, voice
VLAN ID, VLAN aging time, and traffic priority; also
configures port settings, including the way in which a
port is added to the Voice VLAN, and blocking non-
VoIP addresses
Maps the OUI in the source MAC address of ingress
packets to the VoIP device manufacturer
Configures default traffic class, drop priority, user
priority, drop eligible indicator, classification mode for
tagged frames, and DSCP-based QoS classification
Configures Policing setting for all the switch ports
including packet rate, and flow control
Provides overview of QoS Egress Port Schedulers,
including the queue mode and weight; also configures
egress queue mode, queue shaper (rate and access
to excess bandwidth), and port shaper
Provides overview of QoS Egress Port Shapers,
including the rate for each queue and port; also
configures egress queue mode, queue shaper (rate
and access to excess bandwidth), and port shaper
Provides overview of QoS Egress Port Tag
Remarking; also sets the remarking mode (classified
PCP/DEI values, efault PCP/DEI values, or mapped
versions of QoS class and drop priority)
Configures ingress translation and classification
settings and egress re-writing of DSCP values
Configures DSCP-based QoS ingress classification
settings
Configures DSCP translation for ingress traffic or
DSCP remapping for egress traffic
Maps DSCP values to a QoS class and drop
precedence level
Configures QoS policies for handling ingress packets
based on Ethernet type, VLAN ID, TCP/UDP port,
DSCP, ToS, or VLAN priority tag