LevelOne GEP-1070 - Page 27

27
Menu
Description
Page
Configuration
Port Group
Filtering
Configures multicast groups to be filtered on specified
port
146
LLDP
Link Layer Discovery Protocol
148
LLDP
Configures global LLDP timing parameters, and port-
specific TLV attributes
148
LLDP-MED
Configures LLDP-MED attributes, including device
location, emergency call server, and network policy
discovery
151
PoE
Configures Power-over-Ethernet settings for each port
156
Configuration
To disable/enable PoE with priority, and power limit
157
Time Scheduling
To set the scheduling date and hourly period.
159
Auto Checking
To set the checking IP address, and time intervals.
160
MAC Table
Configures address aging, dynamic learning, and
static addresses
162
VLANs
Virtual LANs
164
VLAN
Membership
Configures VLAN groups
165
Ports
Specifies default PVID and VLAN attributes
166
Private VLANs
168
PVLAN
Membership
Configures PVLAN groups
168
Port Isolation
Prevents communications between designated ports
within the same private VLAN
169
VCL
VLAN Control List
170
MAC-based
VLAN
Maps traffic with specified source MAC address to a
VLAN
170
Protocol-based
VLAN
172
Protocol to
Group
Creates a protocol group, specifying supported
protocols
172
Group to
VLAN
Maps a protocol group to a VLAN for specified ports
174
Voice VLAN
175