LevelOne GEP-1070 - Page 26

26
Menu
Description
Page
Static Table
Adds static entries based on port, VLAN ID, and
source MAC address and IP address in ARP request
packets
108
AAA
Configures RADIUS authentication server, RADIUS
accounting server, and TACACS+ authentication
server settings
109
Aggregation
111
Static
Specifies ports to group into static trunks
112
LACP
Allows ports to dynamically join trunks
114
Loop Protection
116
Spanning Tree
117
Bridge Settings
Configures global bridge settings for STP, RSTP and
MSTP; also configures edge port settings for BPDU
filtering, BPDU guard, and port error recovery
119
MSTI Mapping
Maps VLANs to a specific MSTP instance
123
MSTI Priorities
Configures the priority for the CIST and each MISTI
125
CIST Ports
Configures interface settings for STA
126
MSTI Ports
Configures interface settings for an MST instance
130
MVR
Configures Multicast VLAN Registration, including
global status, MVR VLAN, port mode, and immediate
leave
131
IPMC
IP Multicast
134
IGMP Snooping
Internet Group Management Protocol Snooping
134
Basic
Configuration
Configures global and port settings for multicast
filtering
135
VLAN
Configuration
Configures IGMP snooping per VLAN interface
138
Port Group
Filtering
Configures multicast groups to be filtered on specified
port
140
MLD Snooping
Multicast Listener Discovery Snooping
141
Basic
Configuration
Configures global and port settings for multicast
filtering
141
VLAN
Configures MLD snooping per VLAN interface
144