76
RMON Event
Use the RMON Event page for configurations.
PATH
Configuration \ Security \ Switch \ RMON \ Event
Figure 28: RMON Event Configuration
PARAMETERS
These parameters are displayed:
◆ Delete – Check to delete the entry after the next save.
◆ ID – Indicates the index of the entry. The range is from 1 to 65,535.
◆ Desc – Indicates this event, the string length is from 0 to 127, default is a null string.
◆ Type – Indicates the notification of the event, the possible types are:
■ none: The total number of octets received on the interface, including framing characters.
■ log: The number of uni-cast packets delivered to a higher-layer protocol.
■ snmptrap: The number of broad-cast and multi-cast packets delivered to a higher-layer
protocol.
■ logandtrap: The number of inbound packets that are discarded even the packets are
normal.
◆ Community – Specify the community when trap is sent, the string length is from 0 to 127,
default is "public".
◆ Event Last Time – Indicates the value of sysUpTime at the time this event entry last
generated an event.
To Next Page
Loading...
