LevelOne GEP-2651 - Page 116

Publication date: June, 2015
Revision A1
107
Parameter description:
 Snooping Enabled:
Enable the Global IGMP Snooping.
 Unregistered IPMCv4 Flooding enabled :
Enable unregistered IPMCv4 traffic flooding.
 IGMP SSM Range :
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM
service model for the groups in the address range. Format: (IP address/ sub mask)
 Leave Proxy Enable:
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding unnecessary leave
messages to the router side.
 Proxy Enabled :
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary join and leave
messages to the router side.
 Port :
It shows the physical Port index of switch.
 Router Port :
Specify which ports act as router ports. A router port is a port on the Ethernet switch that
leads towards the Layer 3 multicast device or IGMP querier.