Publication date: June, 2015
Revision A1
from the IP subnet-based VLAN, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New IP subnet-based VLAN
Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row is added to
the table, and the IP subnet-based VLAN entry can be configured as needed. Any IP
address/mask can be configured for the IP subnet-based VLAN entry. Legal values for a
VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled on the selected stack switch unit when you click
on "Save". The “Delete” button can be used to undo the addition of new IP subnet-based
VLANs. The maximum possible IP subnet-based VLAN entries are limited to 128.
To Next Page
