Publication date: June, 2015
Revision A1
Selected: Classify only selected DSCP for which classification is enabled as specified in
DSCP Translation window for the specific DSCP.
All: Classify all DSCP.
Egress :
Port Egress Rewriting can be one of below parameters
Disable: No Egress rewrite.
Enable: Rewrite enable without remapped.
Remap: DSCP from analyzer is remapped and frame is remarked with remapped
DSCP value.
Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved values.
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh):
You can click them for refresh the QoS Port DSCP information by manual.
To Next Page
