Page 94
Step 8: Press and to choose Custom Holiday
Step 9: Press Select/Save
From the custom holiday editor screen, the date of the holiday can be
entered. As can be seen in the image above, there are two date
fields. This allows a range of dates to be entered, such as the dates
for summer vacation at a school. In addition to the dates, a day of
the week field is available for including and excluding days. This is
only useful if a date range is entered. A day is included if the initial
for the day is upper case, if it is lower case, it is excluded. An
example of its usage would be Memorial Day. Memorial Day is
defined as the last Monday of the month of May. To set this up, you
would select the date range of 5/25 - 5/31, the last full week. Then
select only Monday from the day of the week field
Step 10: Press and to scroll through the month
Step 11: Press . once to position the cursor in the next field
Step 12: Press and to scroll through the day
Step 13: Press . once to position the cursor in the next field
Step 14: Press and to scroll through the year
In addition to the standard number ranges, the value “an”, short for
any, is also included. When a value of “an” is assigned, that portion
of the date is not used. For example, if you wanted something
special to happen on the 15
th
of each month, you would enter the
dates as “an/15/an”.
Step 15: Press . once to position the cursor in the next field
Step 16: Press and to scroll through the month
Step 17: Press . once to position the cursor in the next field
Step 18: Press and to scroll through the day
Step 19: Press . once to position the cursor in the next field
Step 20: Press and to scroll through the year
Step 21: Press . once to position the cursor in the next field
Step 22: Press and to scroll through the day of the week.
Step 23: Repeat Steps 21-22 as needed for each day of the week
NEW HOLIDAY FROM
CUSTOM HOLIDAY
01/04/00 New:001
01/04/00 MTWTFSS
To Next Page
Loading...
