Scheduler
Z-Max Advanced Programming & Systems Design Guide rac00-sdg
Revision A:11/2005 Page 95
A day is included if the initial for the day is upper case, if it is lower
case, it is excluded.
Step 24: Press Select/Save
Step 25: The day of the week portion of the LCD changes to the holiday list
assignment entry. The holiday can be assigned to any of the four
holiday list numbers. Use the and to select the field
Step 26: Press and to select the list number.
If the number is displayed, the holiday is included in that list. If the
field is an underline, the holiday is not part of that list. A holiday may
be a member of more than one holiday list. You must assign the
holiday to at least one holiday number.
Step 27: Press Select/Save, once the holiday list assignments are completed as
desired
Step 28: You will now be able to edit the holiday name. If you would prefer to
change it, use the and to select the character and use
and to change the character. You can also type in the new name
using the keypad.
Step 29: Press Select/Save once the name is as desired
Edit a Holiday
This menu allows you to make changes to holidays that you have already assigned to
the system.
Step 1: Press the Menu Button
Step 2: Press until you get to the Scheduler Screen
Step 3: Press Select/Save
Step 4: Press until you get to the Holiday Editor Screen
Step 5: Press Select /Save
Step 6: Press until you get to the Edit A Holiday Screen
02/02/an Edt:001
02/02/an HD:1-3-
02/02/an New:001
HOLIDAY 1
To Next Page
Loading...
