Scheduler
Z-Max Advanced Programming & Systems Design Guide rac00-sdg
Revision A:11/2005 Page 99
Holiday list. Use and to toggle the Holiday List on or off. Use
the to move to the next field.
Step 11: Once you are complete with the Holiday Lists, Press Select/Save
Step 12: Press the and to select the Action you want to associate with
the Event. If you forgot to add an Action, you can select the New Action
List, to add additional Actions
Step 13: Press Select/Save
Step 14: Press the and to toggle between Yes or No for if the event is
to be a Single event
If single event is set to YES, the event will happen the next time the
event is scheduled for and will be automatically disabled so it only
occurs once. If single event is set to NO, the event will happen every
time the scheduled time is met
Step 15: Press Select/Save
Step 16: Press the and to set the number of Sweeps, if any, that you
want to occur with this event.
Step 17: Press Select/Save
The Menu will bring you back to a point where more Events can be
edited. Press Cancel to take you back to the Main Menu.
Edit an Event
Once an Event has been added, it can be edited.
Step 1: Press the Menu Button
Step 2: Press until you get to the Scheduler Screen
Step 3: Press Select/Save
your sys
em
s con
ro
ng a
u
ng
a
s
evacuated on holidays, like an office building,
and the event you are scheduling is for interior
lighting then generally you would not include
holiday list(s) in an event. The converse is also
true. If your building is usually occupied on
holidays, you must
include the holiday list in the
event. Remember that once a holiday is put into a
holiday list, that day is "removed" from the
general calendar and events will only be triggered
on that day if the holiday list is included with the
event.
12:00am New:004
Single Event=NO
E:001 Act 20
Sweep Count=000
To Next Page
Loading...
