Leviton EZ-MAX - Overview and Introduction; Document Structure Overview

Overview Introduction
Z-Max Advanced Programming & Systems Design Guide rac00-sdg
Revision A:11/2005 Page 1
Overview
Introduction
Thank you for choosing Leviton’s Z-MAX line of products for your relay needs. The Z-
MAX product line offers a scalable solution of relay and relay control which can fit any
application from the simple 2 or 3-circuit needs with time clock control, to a complete
campus solution, fully integrated with your building management system products.
This user’s guide is has four parts:
1 Detailed operational information,
2 A complete description of Simple programming mode,
3 An Advanced Programming Guide, and
4 A Systems Design Guide.
Part 1 contains detailed information about panel operation from the front panel
interface. This section walks you through all front panel features with complete
descriptions of each.
The second, Part 2, contains a complete description of simple programming mode
with documentation on all required programming steps and their application.
The Advanced Programming Guide, found as Part 3 of this manual, is your
complete manual to configuring your Z-Max product. It covers all Z-Max features with
a complete description of all menu options. The advanced programming guide
assumes a basic familiarity with relay systems and Z-Max cabinet programming
philosophy.
Part 4 of this manual contains the System Design Guide and is designed to
familiarize yourself with the requirements common to more complex installations of Z-
Max and their related products.
This manual covers all products in the Z-Max product line as the steps given are
somewhat generic in nature. The particular requirements for your product, especially
as related to terminal location, may differ slightly from that shown. Please review all
markings and labels on your product to ensure that your actions are correct.
L
ev
it
on recommen
d
s a
l
ways c
h
ec
ki
ng our
website at http://www.leviton.com/lms for latest
version of this guide and late breaking notes,
requirements, application information, and
firmware updates.