Leviton EZ-MAX - Event Editor; Add a New Event

Page 98
Event Editor
Add a New Event
The first step in adding a new event is to input the time that event is to occur. There
are three different ways that the time can be entered; as an absolute time, as an
offset from sunrise (SR) or as an offset from sunset (SS).
Step 1: Press the Menu Button
Step 2: Press until you get to the Scheduler Screen
Step 3: Press Select/Save
Step 4: Press until you get to the Add A New Event Screen
Step 5: Press Select /Save
The following screen will appear. Note that the E# will be the next
unused Event number.
Step 6: Use the keypad to key in the desired Event time.
Step 7: Press or to set the am, pm, +SR, -SR, +SS and -SS
When you choose an offset from Sunrise or Sunset, the time you enter
in the Hour:Minute field becomes the time of the offset.
Step 8: Press Select/Save
Step 9: Use the and to select the day of the week and use and
to toggle the day On or Off. An upper case letter indicates that the
day of the week is included, a lower case letter indicates that the day is
excluded.
Step 10: Once you have selected the days of the week, you can assign one of the
4 Holiday lists to the event. Use the to move the cursor to the
C
rea
ti
ng an even
t
i
s
th
e process o
f
"
sc
h
e
d
u
li
ng
"
or assigning one or more times to an action. As
such, in order to be successful with the Event
Editor, you must first have added actions.
Add Event E:002
12:00am
12:00am New:004
MTWTFss H:1---