Factory Defaults
Z-Max Advanced Programming & Systems Design Guide rac00-sdg
Revision A:11/2005 Page 33
Factory Defaults
If it ever becomes necessary to restore the factory defaults and begin the
programming from a clean slate, simply:
Step 1: Press the Menu Button
Step 2: Press until you get to the Configuration Screen
Step 3: Press Select/Save
Step 4: Press until you get to the Factory Defaults Screen
Step 5: Press Select /Save
Step 6: Press once and the N will change to a Y.
Step 7: Press Select/Save
Saving & Restoring Configuration
Your configuration data can be saved and restored to/from a connected PC using our
PC configuration program. This program is included on the compact disc included with
every cabinet, can be downloaded from our website, or can be ordered from
Customer Service. Leviton recommends that a backup of all cabinet configuration
files be made so that in the unfortunate event of product failure, a quick means by
which to restore configuration is possible.
FACTORY DEFAULTS
INITIALIZE ? N
Resetting to factory defaults will erase any
programming or configuration you’ve completed. Any
parts of this programming you desire to use after the
rest will have to be recreated from scratch
programming in your system.
To Next Page
Loading...
