Page 104
CLIF Commands
As of the time of printing, the available CLIF commands are listed below. As the
software is constantly evolving, the available commands are changing so the help
menu as discussed above should remain the final authority on CLIF commands.
Command Syntax/Description
ACT
[<actionId>|'?' [parms]] (S
et/List/Trigger Action Lists)AS AS [<options>|'?'] (Astronomical Clock)
BOARD [<'L'|'S'>] (Set/List board type as large or small)
BYE log off and if Tim/Modem/Ethernet shell, hang up modem
COM Allows for direct communication between the USB port and
the modem or ethernet module
CONNECT <'baudrate'> connect to modem
DATE Displays Date
EECLR Erase the Serial EEPROM chip
EXIT Go to the Boot Loader Application.
FD Initialize to Factory Defaults
FDCLR Clear Factory Default Flags
FT FT < A=Auto| M=Manual<1.8> > - Factory Self Test
GC Get Configuration Data
GRP <grpId> <ON|OFF|BWO|BWC|BWD]|REL|REQ>
[<priority>]
To Next Page
Loading...
