3-4 Service Manual
7526
REPORTS
Menu Settings Page See “Menu Settings Page” on page 3-24.
EVENT LOG
Display Log See “Display Log” on page 3-25.
Print Log See “Print Log” on page 3-25.
Clear Log See “Clear Log” on page 3-26.
SCANNER TESTS
ASIC See “ASIC Test” on page 3-26.
Feed Test See “Feed Test” on page 3-26.
Sensor Test See “Sensor Tests” on page 3-27.
Scanner Calibration Reset See “Scanner Calibration Reset” on page 3-28.
Adf Magnification See “Adf Magnification”.
EXIT DIAGNOSTICS This selection exits Diagnostics mode, and then Resetting the
Printer displays. The printer performs a POR, and then returns to
normal mode.
To Next Page
Loading...
