Lexmark X746de - Page 80

2-40 Service Manual
7526
Go Back
Previous
Next
920.02
POST Error
Tray 1 motor not connected. • POR the printer.
• If the error message persists, go to “140.xx,
920.02—Autocomp (tray 1) motor error
service check” on page 2-51.
920.03
POST Error
Transfer module not connected. • POR the printer.
• If the error message persists, go to “920.03,
920.25—Transfer Module Missing error
service check” on page 2-112.
920.04
POST Error
Fuser motor not connected. • POR the printer.
• If the error message persists, go to “920.04—
POST—fuser motor not connected error
service check” on page 2-113.
920.05
POST Error
Printhead motor not connected. • POR the printer.
• If the error message persists, go to “920.05—
POST—printhead motor not connected error
service check” on page 2-114.
920.06
POST Error
Input sensor not connected. • POR the printer.
• If the error message persists, go to “920.06—
Input sensor service check” on page 2-114.
920.07
POST Error
Narrow media sensor not connected. • POR the printer.
• If the error message persists, go to “920.07—
POST—Narrow media sensor error service
check” on page 2-115.
920.08
POST Error
Exit sensor not connected. • POR the printer.
• If the error message persists, go to “920.08—
Exit sensor service check” on page 2-116.
920.09
POST Error
Four toner sensors are not connected. • POR the printer.
• If the error message persists, go to “920.09—
POST—Four toner sensor not connected
error service check” on page 2-118.
920.10
POST Error
Three toner sensors are not
connected.
• POR the printer.
• If the error message persists, go to “920.10—
POST—Three toner sensors not connected
error service check” on page 2-119.
920.11
POST Error
Two toner sensors are not connected. • POR the printer.
• If the error message persists, go to “920.11—
POST—Two toner sensors not connected
error service check” on page 2-120.
920.12
POST Error
One toner sensor is not connected. • POR the printer.
• If the error message persists, go to “920.12—
POST—One toner sensor not connected
error service check” on page 2-121.
920.13
POST Error
Cartridge motor 1 (top) not connected. • POR the printer.
• If the error message persists, go to “920.13—
POST error service check” on page 2-122.
920.14
POST Error
Cartridge motor 2 (middle) is not
connected.
• POR the printer.
• If the error message persists, go to
“920.14—
POST—Cartridge motor 2 not connected
error service check” on page 2-123.
Error code Description Action