CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/037-1
Beta Draft Confidential
7
Troubleshooting
This chapter provides general troubleshooting information for the CBX 500. Unless
otherwise noted, this chapter addresses only hardware problems and their most
probable solutions. If you suspect software problems, see the B-STDX, CBX, and GX
Switch Diagnostics Guide.
The status of the CBX 500 switch and its modules is indicated by status LEDs.
For more information about the location and meaning of the LEDs, see Chapter 5,
“Determining the Operating Status.”
This chapter includes the following topics:
• Power-up Diagnostics for SP and IOP Modules
• Switch Troubleshooting
• IOP Module Troubleshooting
• Power Supply Troubleshooting
To Next Page
Loading...
Need help?
General
