IOP and IOA Module Specifications
4-port Ethernet IOP Module
Beta Draft Confidential
A-364/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide
4-port Ethernet IOP Module
The 4-port Ethernet module provides high-speed Ethernet access to Lucent’s
switching platforms. When using IP Services software, the 10/100-Mbps Ethernet
module provides IP forwarding and routing decisions for IP traffic arriving from
common Ethernet ports on the same module, from any ATM port(s) on the same
switch, or from any ATM Multipoint-to-Point Tunnel (MPT) in the network.
CBX 500 IP routing tables are distributed to all modules performing IP routing.
The Ethernet module also provides high-speed links to local Internet/Intranet hosting
servers.
Specifications
Physical Dimensions
Power Requirements
90-91 watts
Temperature Range
0-50°C (32-122°F)
Table A-13. 4-port Ethernet IOP/IOA Physical Dimensions
Dimension IOP IOA
Height 17.25 in (43.18 cm) 23 in (58.4 cm)
Width 1.06 in (2.69 cm) 1.06 in (2.69 cm)
Depth 12.25 in (30.48 cm) 5 in (12.7 cm)
Weigh 2 lb (.91 kg) 1.6 lb (.73 kg)
To Next Page
Loading...
Need help?
General
