About This Guide
Beta Draft Confidential
xxii4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide
Reading Path
Use the following guides to install and manage the CBX 500 switch:
This guide describes the processor and
input/output modules (IOMs) on the switch, and
the configuration of physical ports, timing, and
other attributes through NavisCore.
This guide describes how to install and set up the
CBX 500 switch hardware, replace hardware
modules, and interpret LED status indicators.
These guides describe how to install and upgrade
NavisCore network management software and
supporting applications on the Network
Management Station (NMS). You manage a CBX
500 switch through the NMS NavisCore software.
This guide describes how to configure and manage
NavisCore, network maps, and Lucent switches. It
also describes how to add third-party objects to the
map and access them through NavisCore.
CBX 500
Multiservice WAN
Switch Hardware
Installation Guide
Network
Management
Station Installation
and Upgrade
Guides
Getting Started
User’s Guide
Switch Module
Configuration
Guide
To Next Page
Loading...
Need help?
General
