Beta Draft Confidential
Installing and Removing Modules
Installation and Removal Precautions
6-24/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide
Installation and Removal Precautions
TheCBX500switchdesignenablesyoutoinstall,remove,andreplacemostmodules
by “hot-swapping” (that is, without powering down the switch). However, you may
choose to power down the switch as a precaution if the switch is not currently
operational.
Read the following precautions to avoid personal injury and damage to the equipment.
Parts Repair
Static Protection
Electrical Energy Hazard
!
Caution – Do not attempt to repair parts or modules yourself. Return all defective
modules to Lucent for repair. Only Lucent-trained service representatives are
authorized to service parts.
Warning – Do not attempt to remove or install modules without using appropriate
static-guard measures. Lucent includes a grounded antistatic wrist strap in the
accessory kit.
Warning – When the switch is powered up, an electrical energy hazard is present
within the card cage. Remove all metallic objects from hands and wrist to prevent
bridging of live contact points.
To Next Page
Loading...
Need help?
General
