Beta Draft Confidential
About This Guide
CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03xxiii
Documentation for New Modules
The following guides provide information about hardware installation and switch
software configuration for specific modules.
• CBX 1-Port Channelized STM-1/E1 IMA I/O Module User’s Guide
(Product Code: 80170)
• GX BIO-C, OC-48c/STM-16c, and SF2 Modules Users’ Guide
(Product Code: 80199)
How to Use This Guide
This guide contains the following information:
Read To Learn About
Chapter 1 The CBX 500 switch, its features and hardware components.
Chapter 2 Product specifications for the CBX 500 hardware, including
environmental and electrical considerations. This chapter also
lists the Safety Warnings related to the use of the CBX 500
hardware.
Chapter 3 Installation prerequisites, such as unpacking the unit, taking
inventory, and gathering installation items and equipment.
Chapter 4 How to set up and install the CBX 500 hardware.
Chapter 5 How to complete the installation of the CBX 500 hardware,
power-up the switch, and determine its operating status.
Chapter 6 How to install new modules or replace existing modules in a
CBX 500 switch, including the switch processor (SP), IOP
modules, power supplies, cooling-fan modules, and PCMCIA
cards.
Chapter 7 How to determine hardware operational status and perform
general troubleshooting.
Appendix A CBX 500 cell- and frame-based I/O modules.
To Next Page
Loading...
Need help?
General
