SET-FECOM 5of1Page SET-FECOM
NAME
CommunicationsFar-EndSetset-fecom:
FORMATINPUT
set-fecom:
Address
[:com=
Communications
][,nsus=
NS/US
]
[,lanreset=
lanreset
];
DESCRIPTION
datasectiontheovercommunicationdisablesorenablescommandThis
overheadembeddedanisDCCALAN.IAOor(DCC)channelscommunication
communicationsend-to-endforusedlineSONETtheinchannelcommunications
informationstatusandcontrol,alarm,carriesDCCThemaintenance.and
(NEs).elementsnetworkbetween
NOTE:
only.usersprivilegedtoavailableiscommandThis
isitifsuccessfullycompletewillcommandthis13.0,ReleasewithStarting
session.loginremoteaduringexecuted
are:parametersinputThe
Address
LAN.IAOorDCCtheofaddresstheidentifiesAddress
Addresses:DCCLinearValid dcc-{m,a,b,c,all}
releasesringlaterandR15.0OC-3toapplyalsoaddressesThese
DCC"identical"theforprovisionedisinterfaceringmainthewhen
mode.
Addresses:DCCRingValid dcc-{m1,m2,a,b,c,all}
OLIU):27-type(forAddressesDCCOC-1Valid dcc-all,
dcc-{m,a,b,c}{1,2}-{1,2}
Address:LANIAOValid lan later)and13.0(Release
com specifiedaovercommunicationwhetherindicatesparameterThis
TARPlaterand13.0ReleaseOC-3(forinterfaceLANIAOorDCC
arevaluesvalidThedisabled.orenabledisreleases) enabled or
disabled isvaluedefaultThe. enabled.
(port’sLANIAOthe15.0,ReleaseOC-3withStarting address=
lan
)
forvaluedefault
com
is disabled.
DCC,specificDCC-all,perenabled/disabledbemustCommunication
point,someatexample,anAsDCC.specificorLAN.IAOor
mightLANIAOtheandchannelsDCCsomeovercommunication
enabletoorderIntime.sametheatenabledbetohave
thisinterface,LANIAOandchannelDCCabothovercommunication
enabletooncetwice;executedbetohavewillcommand
enabletotimeothertheandDCC,aovercommunication
OC-3DDM-2000
2000February2Issue 11-365
To Next Page
Loading...
Need help?
General
