Lucent Technologies DDM-2000 OC-3 User Manual

SET-TRACE-STS1 3of1Page SET-TRACE-STS1
NAME
CharacteristicsTracePathSTSSetset-trace-sts1:
FORMATINPUT
set-trace-sts1: Address [:EXPTRC= Expectedincomingpathtrace ]
[,TRC= OutgoingPathTrace ];
DESCRIPTION
thetostringscharacteralphanumericuser-selectableassignscommandThis
signal.STS-1cross-connectedSTSanoffieldstracepathreceiveandtransmit
through"a"and"Z"through"A"letterstheincludecharactersASCIIallowedThe
characters:specialfollowingtheand"9",through"0"numbers"z",
sign)(dollar$sign)(pound#
(ampersand)&sign)(percent%
parenthesis)(close)parenthesis)(open(
(asterisk)*(plus)+
(hyphen)-(pipe)|
bracket)square(close]bracket)square(open[
bracket)(close}bracket)(open{
accent)(grave‘(apostrophe)’
(slash)/(period).
than).(greater>than)(less<
NOTE:
circuitBBG4BatoterminatingpathsSTStoapplicableonlyisfeatureThis
pack.
are:parametersinputThe
Address terminatingpathSONETtheofaddresschannelSTS-1aisThis
assigned.istracepaththewhichforsignal
OC-3):(withinAddressesValid {m,c}-{1-3},{a,b}-{1,2}
Release(OC-329-typeor24-typewithequippedisshelftheIf
unitMainvalidtheslots,unitMainitsinpackscircuitOLIU15.0)
are:addresses m-{1-12}
Addresses:OnlyRingsValid m-{1-3}
Addresses:OLIU27-typeValid m-{1,2}
EXPTRC isItmessage.tracepathincomingexpectedthespecifiesEXPTRC
characters.alphanumericlessor62ofstringa
11-478 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English