Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-FECOM 2of1Page RTRV-FECOM
NAME
CommunicationsFar-endRetrievertrv-fecom:
FORMATINPUT
rtrv-fecom:[ Address ];
DESCRIPTION
(NE’s)element’snetworkaofstateprovisionedthedisplayscommandThis
asinterface,LANIAOtheofand(DCC),channelscommunicationdatasection
thebyset set-fecom command.
lineSONETtheinchannelcommunicationsoverheadembeddedanisDCCThe
alarm,carriesDCCThemaintenance.andcommunicationsend-to-endforused
NEs.betweeninformationstatusandcontrol,
is:parameterinputThe
Address valuedefaultTheLAN.IAOorDCCtheofaddresstheisAddress
is dcc-all
Addresses:LinearValid dcc-{m,a,b,c,all}
releasesringlaterorR15.0OC-3toapplyalsoaddressesThese
DCC"identical"theforprovisionedisinterfaceringmainthewhen
mode.
Addresses:RingValid dcc-{m1,m2,a,b,c,all}
OLIU):27-type(forAddressesRingOC-1Valid
dcc-{m,a,b,c}{1,2}-{1,2}
OLIU):26G2-U(forAddressesRingOC-1Valid
dcc-{a,b,c}{1,2}-1
Address:LANIAOValid lan
11-192 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English