Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-PATH-STS1 4of1Page SWITCH-PATH-STS1
NAME
STS-1PathSwitchswitch-path-sts1:
FORMATINPUT
switch-path-sts1: Address :pri= Priority ;
DESCRIPTION
ringprotectedpathonswitchingpathSTS-1controlscommandThis
(one-way).unidirectionalalwaysisswitchingPathconfigurations.
are:parametersinputThe
Address carryingcurrentlychannelSTS-1theofaddresstheisAddress
iscommandthisWhentraffic.continueanddropordropped
thetopaththisfromawayswitchedbewilltrafficexecuted,
parameter.thisfordefaultnoisTherering.theonpathother
becannotDS30x1orring0x1asprovisionedConnections
switched.
Addresses:OC-3Valid
m{1,2}-{1-3,all} OLIU)(OC-3
Addresses:OC-1Valid
m{1,2}-{1-2} Main)inOLIU(27-type
{a,b,c}{1,2}-{1-2} FN)inOLIU(27G2-U
{a,b,c}{1,2}-1 OLIU)(26G2-U
later)and13.0(Release
Addresses:OC-12Valid
m{1,2}-{1-12,all}
later)and15.0ReleaseMain,inOLIU29G-Uor(24G-U
pri request.switchprotectiontheofprioritytheindicatesPriority
isvaluevalidonlyandoneThe manual arequestsThis.
aunlesspathstandbythetopathaddressedthefromswitch
standbytheonexistsdegradesignalpathorfailsignalpath
path.
NOTE:
low-speedatodroppedsimultaneouslyispathcontinueanddropA
through.passedandinterface
OC-3DDM-2000
2000February2Issue 11-495

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English