Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285
Page 2 of 12 Issue 3, June 2001
DDM-2000 OC-3 MULTIPLEXER
n. Establishing single-homed or dual-homed Release 15 OC-3 or OC-12 access via
FT-2000 OC-48 backbone ring.
o. Establishing single-homed or dual-homed Release 15 OC-3 or OC-12 access via
WaveStar TDM 2.5G OC-48 backbone ring.
p. Establishing stand-alone FiberReach access via DDM-2000 OC-3 host.
q. Establishing OC-3 optical span extensions between FT-2000 OC-48, DDM-2000 OC-
3, or DDM-2000 OC-12 Rings.
r. Establishing Release 15 OC-3 or OC-12 linear extensions between FT-2000 OC-48
and DDM-2000 OC-3 or DDM-2000 OC-12 Rings.
s. Establishing Release 15 OC-3 or OC-12 linear extensions between WaveStar TDM
2.5G OC-48 and DDM-2000 OC-3 or DDM-2000 OC-12 Rings.
t. Upgrading DDM-2000 OC-3/OC-12 dual ring interworking from EC-1 to OC-3/IS-3.
u. Upgrading DDM-2000 OC-3 ring network to OC-12 ring network to OC-12 ring
network using OC-3 shelves.
v. Upgrading DDM-2000 OC-3 ring network to OC-12 ring network to OC-12 ring
network using OC-3/OC-12 shelves.
w. Upgrading DDM-2000 OC-12 ring by removing OC-12 shelf and replacing with
existing single-homed OC-3 shelf.
x. Upgrading DDM-2000 OC-12 ring network using 24-type OLIUs to OC-12 ring
network using 29-type OLIUs.
The Operation tab covers procedures for operating the system such as connecting and
using the craft interface terminal (CIT), displaying alarm and status conditions, installing a
new generic program, etc.
The Trouble Clearing tab covers alarms and trouble reports.
The Detailed Level Procedures (DLP) tab contains all of the DLPs, beginning with
DLP-500, used in this manual.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English