Lucent Technologies DDM-2000 OC-3 User Manual

SET-LAN 4of1Page SET-LAN
NAME
parametersinternalLANIMAtheSetset-lan:
FORMATINPUT
set-lan: Address :grpid= imagroupid ,aal5= aal5fmt ,
vpi= virtualpathid ,vci= virtualchannelid ,scrambler= atmscrambler ,
polynom= atmpolynomial ,length= framelength ,fcs= framecheckseq ,
alm= alarmlevel ,pmmd= pmmode ;
DESCRIPTION
applicableisitand15.0,ReleaseOC-3withstartingavailableiscommandThis
pack.circuitBBF10)or(BBF9LANIMAthetoonly
parameters.internalLANIMAtheofsettingsthecontrolscommandThis
are:commandthisforparametersinputThe
Address packLANIMAthewithequippedslot(s)SpeedLowtheofAddress
Addresses:Valid {a,b,c}-{1-7,all}
NOTE:
occupiespackLANIMAthethatSince consecutivetwo Low
used:beshouldguidelinesfollowingslots,Speed
sloteitherfromderivedbecanaddresspackLANIMAThe
theifexample,Forpack.thebyoccupiedtwotheofnumber
slotsSpeedLowininsertedispackcircuitLANIMA
a-1 and
a-2 eitherbecancasethisinusedaddressthe, a-1 or a-2 .
SpeedLowotherininsertedispacktheifapplyrulessameThe
slots.
arefollowingthe7),and(4addressesSpeedLowusingWhen
combinations:addressallowedthe
4}and{a,b,c}-{3 allowedis
7}and{a,b,c}-{6 allowed.is
grpid IMAanidentifytousedvalueintegeranisThisIdentifier.GroupIMA
betweenrangesintegerThisDS1s.8to1ofGroup 0 and 255. 0 is
value.defaultthe
NOTE:
ofvalueThe grpid LANIMAtheunlesschangedbecannot
down.islink
11-370 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English