Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-LINE 2of1Page SWITCH-LINE
NAME
LineSwitchProtectionswitch-line:
FORMATINPUT
switch-line: Address :pri= Priority ;
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
switching.protectionlineOC-3ofoperationthecontrolscommandThis
commandThisswitching.line(one-way)unidirectionalprovidesDDM-2000
localtheatsignalsOC-3incomingofpairtheofoneofselectiontheonlyaffects
maintenance.forusedprimarilyiscommandThiselement.network
are:parametersinputThe
Address lines.OC-3ofpairtheofAddress
Addresses:linearValid fn-{a,b,c}main,
Addresses:ringValid fn-{a,b,c}
pri andrequestswitchingprotectiontheofprioritytheindicatesPriority
values:followingthehas
reset requestsswitchexternalexistingRemoves
inhibit somechanismswitchingprotectiontheFreezes
selectedremainslineactivecurrentthethat
failures.subsequenttheofregardless
lockout theIfline.protectiontheofselectionPrevents
endneartheatselectedcurrentlyislineprotection
thetoswitchedbewillserviceline,activetheas
existinganisthereunlesslineservice inhibit
request.switchingprotection
forced existinganisthereunlesslinestandbytheSelects
inhibit, lockout or, forced protection
request.switching
manual lineactivetheforlinestandbytheSelects
noarethereandgoodislinestandbytheprovided
requests.switchingprotectionexisting
OC-3DDM-2000 2000February2Issue 11-489

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English