Lucent Technologies DDM-2000 OC-3 User Manual

SET-OC1 2of1Page SET-OC1
NAME
CharacteristicsOC-1Setset-oc1:
FORMATINPUT
set-oc1: Address [:dgr= SignalDegradeThreshold ]
[,aisalm= Alarm ];
DESCRIPTION
line.OC-1specifiedaof(parameters)characteristicsthesetscommandThis
are:parametersinputThe
Address line(s).OC-1theidentifiesAddress
OLIUs):27-type(forAddressesOC-1Valid main-all,all,
fn-{a,b,c}-{1,2}-{1,2},fn-all,main-{1,2}-{1,2},
fn-{a,b,c}-all
OLIUs):26G2-U(forAddressesOC-1Valid fn-all,
fn-{a,b,c}-allfn-{a,b,c}-{1,2}-1,
dgr asthresholddegradesignalthespecifiesSignalDegradeThreshold
thresholdthisWhen10.basethetologarithmaoftermsinBERa
hasparameterthisofvalueTheraised.bewillalarmancrossed,is
-6.isvaluedefaultThe-5.to-9ofrangea
NOTE:
OC-1eachofaddressesbothforvaluedegradesignalThe
pairline must signaltochangeanyTherefore,same.thebe
thetomadebeautomaticallywilladdressonefordegrade
software.thebyother
aisalm affectingnonservicetheoflevelalarmprovisionedtheisAlarm
values:followingthehasandAISlineOC-1(NSA)
cr alarmCritical
mj alarmMajor
mn alarmMinor
na (default).reportedbutalarmed,Not
OC-3DDM-2000
2000February2Issue 11-387

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English