Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-PATH-VT1 3of1Page SWITCH-PATH-VT1
NAME
VT1.5PathSwitchswitch-path-vt1:
FORMATINPUT
switch-path-vt1: Address :pri= Priority ;
DESCRIPTION
ringprotectedpathonswitchingpathVT1.5controlscommandThis
(one-way).unidirectionalalwaysisswitchingPathconfigurations.
are:parametersinputThe
Address dropcarryingcurrentlypathVT1.5theofaddresstheisAddress
executed,iscommandthisWhentraffic.continueanddropor
onpathotherthetopaththisfromawayswitchedbewilltraffic
parameter.thisfordefaultnoisTherering.the
Addresses:Valid
m{1,2}-{1-3,all}-{1-7,all}-{1-4,all}
slots)MaininOLIU(OC-3
m{1,2}-{1-2}-{1-7,all}-{1-4,all}
slots)MaininOLIU(27-type
{a,b,c}{1,2}-{1,2}-{1-7,all}-{1-4,all}
slots)FNinOLIU(27G2-U
{a,b,c}{1,2}-1-{1-7,all}-{1-4,all}
later)and13.0Releaseslots,FNinOLIU(26G2-U
m{1,2}-{1-12,all}-{1-7,all}-{1-4,all}
later)and15.0Releaseslots,MaininOLIU29-typeor(24-type
asprovisionedConnections ring0x1 or locked becannot
switched.
NOTE:
atodroppedsimultaneouslyispathcontinueanddropA
through.passedandinterfacelow-speed
pri request.switchprotectiontheofprioritytheindicatesPriority
is:valuevalidonlyandoneThe
manual thefromswitcharequestsparameterThis
pathaunlesspathstandbythetopathaddressed
theonexistsdegradesignalpathorfailuresignal
path.standby
OC-3DDM-2000 2000February2Issue 11-499

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English