Lucent Technologies DDM-2000 OC-3 User Manual

SET-STATE-VT1 3of1Page SET-STATE-VT1
NAME
ChannelsVT1.5ofStateSetset-state-vt1:
FORMATINPUT
set-state-vt1: Address :ps= PrimaryState ;
DESCRIPTION
within:channelsVT1.5ofstatesthesetscommandThis
packs)circuitOLIU29G-Uor24G-Uusing(wheninterfacesOC-12
interfacesOC-3
interfacesOC-1
interfaces.EC-1
andfailuressignalofmonitoringtheoffandonturntousediscommandThis
channels.specifiedforsignalsmaintenance
andOC-1,OC-3,OC-12,withinchannelsVT1.5forsetbecanstatesChannel
VT1.5forandinterfacesDS1tocross-connectedarethatinterfacesEC-1
orOC-3antoringOC-1orOC-12,OC-3,anfromdroppedarethatchannels
interface.EC-1
are:parametersinputThe
Address bothforaddressesValidchannel(s).VT1.5theidentifiesAddress
are:ringandlinear
{m,a,b,c}-all, {m,c}-{1-3}-all,
{a,b}-{1-2,all}-{1-7,all}-{1-4,all},
{m,c}-{1-3,all}-{1-7,all}-{1-4,all}
are:EC-1withinaddressesValid
{a,b,c}-{1-7,all}-{1-4,all}
are:OLIU)(27-typeOC-1withinaddressesValid
m-{1,2}-{1-7,all}-{1-4,all}m-{1,2}-all,m-all, ,
{a,b,c}-{1,2}-all{a,b,c}-all, ,
{a,b,c}-{1,2}-{1-7}-{1-4,all}
later)and11.0ReleaseOLIUs,27G2-U(Requires
are:OLIU)(26G2-UOC-1withinaddressesValid
{a,b,c}-1-all{a,b,c}-all, ,
{a,b,c}-1-{1-7}-{1-4,all}
later)and13.0(Release
packscircuitOLIU29-typeor24-typewithequippedisshelftheIf
are:addressesunitMainvalidtheslots,unitMainitsin
m-{1-12,all}-{1-7,all}-{1-4,all}
11-450 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English