Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-SYNC 4of1Page SWITCH-SYNC
NAME
SynchronizationSwitchProtectionswitch-sync:
FORMATINPUT
switch-sync:s= SyncFunction ,pri= Priority ;
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
switching.protectionsynchronizationtheofoperationcontrolscommandThis
andusedisreferencesynchronizationwhichcontrolusertheletscommandThis
needed.whenreferencesynchronizationaswitchtousertheenables
are:parametersinputThe
s theofonebemayandfunctionsynchronizationthespecifiesSyncFunction
following:
reference references.timingDS1ofswitchingprotectionSelects
forprovisionedissystemtheifonlySpecify External
timing.DS1
mode onlySpecifymode.timingofswitchingprotectionSelects
forprovisionedissystemtheif External orDS1
LineTimed.
circuitpack packs.circuittimingofswitchingprotectionSelects
src and/orline-timingshelfwhichfromlineopticaltheSelects
Thisderived.bewilloutputsynchronizationDS1the
Thisreleases.ringOC-3withavailableisparameter
isSyncAutoreconfigurationifapplicableonlyisparameter
theusingenabled set-sync Thecommand.
areswitchedbecanthatSynchronizationSources
main-1, main-2 and, fn-c.
pri Forrequest.switchingprotectiontheofprioritytheindicatesPriority
ofvaluesSyncFunction reference and circuitpack valuespriority,
are:
reset requestsswitchprotectionactiveClear
inhibit mechanismswitchingprotectiontheFreeze
manual topackreference/circuittimingactivefromSwitch
packreference/circuittimingstandby
ofvalueSyncFunctionaFor mode (prioritythe, pri are:values)
11-502 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English