Lucent Technologies DDM-2000 OC-3 User Manual

SET-DATE SET-DATE
DDM-2000 OC-3 Issue 3 June 2001 11-359
When input, this command will cause the following confirmation message to be
displayed:
If a user does not have the valid permissions for the set-date command, the following
denial message will be displayed:
RELATED COMMANDS
apply
/* Caution! Execution of this command will corrupt the
current quarterhour and current day performance monitoring
data. You have selected the set-date command with these
parameters:
Date =
YYMMDD
Time = HHMMSS */
Execute? (y/n or CANcel/DELete to quit) =
M set-date: DENY
PICC
/* Privilege, Illegal Command Code */
/* You are not authorized to execute this command /*
Page 2 of 2

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English