Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-CRS-STS1 3of1Page RTRV-CRS-STS1
NAME
STS-1Cross-ConnectionRetrievertrv-crs-sts1:
FORMATINPUT
rtrv-crs-sts1[: Address ];
DESCRIPTION
system.DDM-2000thewithincross-connectionsSTS-1retrievescommandThis
theusingenteredareCross-connections ent-crs-sts1 command.
Mainbetweenpossiblearecross-connectionsSTS-3creleases,linearOC-3For
modeSTS-3cThereport.thisindisplayedbealsowillandslots,FN-Candslots
tosetbemust enabled theusing set-oc3 command.
NOTE:
duringexample,(fortypespackdifferentwithequippedare2and1slotsIf
timetheatconsiderediswhatfordataincludewillreportthisupgrade),an
type.packsystemvalidtheas
licensespecialarequiresthatfeatureoptionalanarecross-connectionsSTS-3c
forProvisioning,"and"Administration8,ChapterSeeTechnologies.Lucentfrom
information.additional
cross-VT1.5Aexist.cross-connectionsVT1.5anyifindicatesalsoreportThis
theusingbyobtainedreport,mapconnection rtrv-crs-vt1 willcommand,
cross-connections.VT1.5specifictheshow
is:parameterinputThe
Address cross-whichforchannelsSTS-1moreoroneofaddressThe
isaddressdefaultThereported.betoareconnections all STS-1
system.theinchannels
Addresses:LinearValid {a,b,c},all,
{a,b}-{1-2,all}{m,c}-{1-3,all},
Addresses:RingValid {m,c}-{1-3,all},all,
a-{1,2,all}b-{1,2,all},
theunits,MainitsinOLIUs24-typewithequippedisshelftheIf
are:addressesvalid m-{1-12,all}
ReleaseOC-3with(starting29-typewithequippedisshelftheIf
are:addressesvalidtheunits,MainitsinOLIUs15.0)
{a,b}-{1,2,all}c-{1-3,all},m-{1-12,all},
OC-3DDM-2000 2000February2Issue 11-177

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English