Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-LAN 6of1Page RTRV-LAN
NAME
settingsparameters’internalLANIMARetrievertrv-lan:
FORMATINPUT
rtrv-lan: Address ;
DESCRIPTION
aforpackcircuitLANIMAthewithassociateddatathedisplayscommandThis
thebysetasaddress,specific set-lan command.
applicableisitand15.0,ReleaseOC-3withstartingavailableiscommandThis
pack.circuitBBF10)or(BBF9LANIMAthetoonly
is:parameterinputThe
Address LANIMAtheonportLANIMAtheofaddresstheisAddress
pack.circuit
Addresses:Valid all{a,b,c}-{1-7,all},
NOTE:
occupiespackLANIMAthethatSince consecutivetwo SpeedLow
used:beshouldguidelinesfollowingslots,
sloteitherfromderivedbecanaddresspackLANIMAThe
IMAtheifexample,Forpack.thebyoccupiedtwotheofnumber
slotsSpeedLowininsertedispackcircuitLAN
a-1 and a-2 the,
eitherbecancasethisinusedaddress a-1 or a-2 sameThe.
slots.SpeedLowotherininsertedispacktheifapplyrules
thearefollowingthe7),and(4addressesSpeedLowusingWhen
combinations:addressallowed
4}and{a,b,c}-{3 allowed.is
7}and{a,b,c}-{6 allowedis
OC-3DDM-2000 2000February2Issue 11-195

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English