Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-LS 4of1Page SWITCH-LS
NAME
SpeedLowSwitchProtectionswitch-ls:
FORMATINPUT
switch-ls: Address :pri= Priority ;
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
protectionpackcircuitlow-speedofoperationthecontrolscommandThis
switching.
when(e.g,configurationslow-speedunprotectedindeniediscommandThis
packs).circuitLANIMAwithequipped
are:parametersinputThe
Address abeeithermayAddressesslot(s).low-speedtheofaddressThe
example,(forslotlow-speedsingle ls-a-l inslotslow-speedallor)
example,(forgroupsinglea ls-b-all addressThe). ls-all is
not command.thisforvalid
forAddressesSlotLow-SpeedValid manual and forced:
ls-{a,b,c}-{1-7} (Note: all allowed)not
forAddressesSlotServiceLow-SpeedValid reset and lockout:
ls-{a,b,c}-{1-7,all}
forAddressesSlotProtectionLow-SpeedValid reset and
lockout:
ls-{a,b,c}-8 only)slot(Protection
pri andrequestswitchingprotectiontheofprioritytheindicatesPriority
values:followingthehas
reset (requestsswitchexternalactiveClear lockout,
forced or, manual theontrafficanyreturnand)
slot.servicethetoslotprotection
lockout the(exceptrequestsswitchingprotectionoutLocks
thetodirectedislockouttheIfrequest).reset
theoncurrentlyisthattrafficanyslot,protection
thetobackswitchedunconditionallyislineprotection
bewilllineserviceanyfromtrafficnoandlineservice
directedislockouttheIfline.protectionthetoswitched
wasthatlineservicethatontrafficslot,serviceato
unconditionallyisprotectiontoswitchedpreviously
trafficfurthernoandlineservicethetobackswitched
OC-3DDM-2000 2000February2Issue 11-491

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English