Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-SYNC 11of5Page RTRV-SYNC
Reference/LineActive
timingtheforreferenceexternalactivetheisReferenceActive
isLineActivereported,isReferenceActiveWhengenerator.
isModeProvisionedtheWhenreported.not External,
values:followingthehasReferenceActive
ref-1 timingthetosetisreferencetimingactiveThe
"one".reference
ref-2 timingthetosetisreferencetimingactiveThe
"two".reference
inputautoinarereferencesDS1applicable,Not—
state.
timingtheforreferenceLineTimedactivetheisLineActive
isReferenceActivereported,isLineActiveWhengenerator.
isModeProvisionedWhenreported.not LineTimed Active,
values:followingthehasLine
main-1
main-2
fn-c-1
fn-c-2
NA active.isreferencetimingNeither
ismodetimingactivetheWhen Holdover Active,
providewillthatreferencetimingtheisReference/Line
mode.holdoverofoutswitchessystemtheiftiming
isModeProvisionedtheWhen FreeRunning Active,
reported.notareLineActiveandReference
SwitchingMode
forswitchingmodethewhetherindicatesSwitchingMode
nonrevertive.orrevertiveisgeneratortimingthe
Revertive theIfswitching.modeRevertive
revertiveforprovisionedissystem
automaticallywillitswitching,mode
thetomodeholdoverfromswitch
(modeprovisioned LineTimed or
External goodawhentiming)
available.becomesreference
11-314 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English