Lucent Technologies DDM-2000 OC-3 User Manual

SWITCH-PATH-STS1 4of2Page SWITCH-PATH-STS1
STS-1theorequippednotiscommandtheinspecifiedaddresspaththeIf
thecross-connected,continueanddroporadd/dropdrop,notischannel
message:followingthewithdeniedbewillcommand
SVNS
/*etatSdilaVnitoN,sutatS*/
etcennoc-ssorcro/dnadeppiuqetonsihtapdeificepsehT*/ /*.d
equippedareshelfaofslotsunitMaintheifonlyappliesmessagefollowingThe
theinspecifiedaddresspaththeIfpacks.circuitOLIU29G-Uor24G-Uwith
cross-connectedSTS-3canofpartisthatchannelSTS-1aniscommand
message:followingthewithdeniedbewillcommandthechannel,
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.detcennoc-ssorcylreporptonsihtapdeificepsehT*/
typeofconnectionawithassociatedispathaddressedtheIf
pass-through
ring0x1
DS30x1
lockeddual
message:followingthewithdeniedbewillcommandthe
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.dehctiwsebtonnachtapdeificepsehT*/
NOTE:
OC-NthetoreceiverOC-Nthefromdirectlypassespathpass-throughA
node.thisatdroppednotispaththiswithcarriedserviceThetransmitter.
11-496 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English