Lucent Technologies DDM-2000 OC-3 User Manual

SET-NE 5of3Page SET-NE
unequipped
insertedissignalUnequippedVT1.5orSTS-1The
(OLIUsinterfacesSONETfromlineSONETthetowards
iforcross-connectednotischanneltheifSTS1Es)and
isunitfunctionthebutequippednotisslotlow-speeda
cross-connected.STS-1
NOTE:
thechooseuserthethatrecommendedisIt ais
SONETallsinceparameter,thisforoption
performinganddetectingofcapableisequipment
areceivingwhenswitchingprotectionpath
signal.AISVT/STS
cort RTorOffice)(CentralCOforparameterCO/RTThe
havingassystemtheidentifiesTerminal)(Remote
CO/RTforvaluesTheRT.anorCOaofcharacteristics
are co and rt with rt Thevalue.defaulttheas
theofoperationthecontrolsCO/RTofvalue
control.fanexternaltheanddiscretes,miscellaneous
NOTE:
theoptimizetoenabled;isfeartureStatusNERemotetheWhen
stronlyisitprovisioning,simplifyandnetworkyourofperformance
followed:areguidelines/rulesfollowingthethatrecommended
beshouldGroupAlarmanimplemented,ispartitioningnetworkIf
withinallowedareGroupsAlarm(MultipleareaLevel1atorestricted
area).Level1samethe
Group.AlarmanindefinedbecanAGNEsMultiple
AlarmperAGNEs2ofmaximumadefinetorecommendedisIt
Group.
acrossIdGroupAlarmsamethedefinenottopracticegoodisIt
areas.level1different
11-384 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English