Lucent Technologies DDM-2000 OC-3 User Manual

SET-STATE-STS1 4of2Page SET-STATE-STS1
nmon reportnotDomonitored.nottostatechanneltheSet
notDochannel.theforconditionsstatusoralarm
issignalgoodaifin-servicetostatechannelthechange
theuntilstatethisinremainwillchannelThedetected.
theuntilorcommandthiswithagainchangedisstate
deleted.ischannelthisinvolvingcross-connection
NOTE:
cross-STS-1eitheristhatchannelSTS-1anthatrecommendedisIt
anorpackscircuitMXRVOwithequippedunitfunctionatoconnected
cross-connectedVT1.5isthatchannelSTS-1 not theinputbe nmon state.
theinputischannelSTS-1anIf nmon or auto command,thisusingstate
theinputalsoarechannelSTS-1specifiedthewithinchannelsVT1.5the
nmon or auto whichforchannelsVT1.5toonlyappliesThisstate.
cross-arethatchannelsVT1.5example,(fordefinedarestateschannel
ring).afromdroppedorinterfacesDS1toconnected
ofstateprimaryaIf nmon displayed:bewillmessagefollowingtheentered,is
)s(lennahC*/ sserdda roderotinomebtonlliw
/*etatssihtnidemrala
ofpartisthatchannelSTS-1aniscommandtheinspecifiedaddresspaththeIf
thewithdeniedbewillcommandthechannel,cross-connectedSTS-3can
message:following
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.detcennoc-ssorcylreporptonsihtapdeificepsehT*/
OC-3DDM-2000 2000February2Issue 11-443

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English